Connecting a USB Reader source device

To connect the projector to a USB Reader source device:

1.Connect a USB Reader source device to the USB slot on the projector.

2.If you wish to make use of a speaker or other audio input equipment, take a suitable audio cable and connect one end to the audio input socket of the speaker, the other end to the AUDIO OUT socket of the projector. When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.

The final connection path should be like that shown in the following diagram:

USB flash disk

• If the USB Reader main screen is not displayed after the projector is turned on. Press SOURCE on the projector or remote control and select USB Reader after a source selection bar displays. See "Presenting From a USB Reader" on page 41 for details.

The AUDIO OUT socket on the projector supports USB Reader function only. Please see page 45 for the volume control when using AUDIO OUT.

Connection 19

Page 19
Image 19
BenQ model gp1 user manual Connecting a USB Reader source device, USB flash disk