BenQ MP525 ST Mute Off Volume, See Adjusting the sound on page 41 for details, Lamp Mode Normal

Function

(default setting/value)

Audio Settings

	Standby Monitor
5.	Out
	(Off)
SYSTEM
SETUP:Advanced	Lamp Settings
menu	Security
	Settings
	Baud Rate
	(115200)
	Test Pattern
	(Off)

Description

Mute (Off)

Volume (5)

Power On/Off Ring Tone (On)

See "Adjusting the sound" on page 41 for details.

Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 and MONITOR OUT jacks are correctly connected to devices. See "Connecting a monitor (MP525 ST only)" on page 19 for how to make the connection.

Enabling this function slightly increases the standby power consumption.

Lamp Mode (Normal)

See "Setting Lamp Mode as Economic" on page 52 for details.

Reset Lamp Timer

See "Resetting the lamp timer" on page 56 for details.

Equivalent Lamp Hour

See "Getting to know the lamp hour" on page 52 for details on how the total lamp hour is calculated.

Change Password

You will be asked to enter the current password before changing to a new one. See "Utilizing the password function" on page 27 for details.

Power On Lock (Off)

See "Utilizing the password function" on page 27 for details.

Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel.

Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free from distortion.

Operation 49