Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon
Main menu
Highlight
Current input signal 
Status
Press Menu/ Exit to the previous page or to exit.
The following example describes how to set the OSD language.
1. | Press Menu/Exit on the projector or | 3. | Press | to highlight Language | |
| remote control to turn the OSD menu on. |
| and press | / to select a | |
|
|
| preferred language. | ||
2.Use 
/ 
to highlight the SYSTEM SETUP: Basic menu.
4.Press Menu/Exit twice* on the projector or remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
