BenQ user manual Switching input signal, Changing Color Space MP625P only

Models: MP625P

1 68
Download 68 pages 14.66 Kb
Page 31
Image 31
Switching input signal

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. When starting up, the projector automatically searches for the available signals.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available input signals.

1. Press SOURCE on the projector or remote control. A source selection bar displays.

2. Press Changing Color Space (MP625P only) /Manual background until your desired signal is selected and press Mode/Enter.

Once detected, the selected source information will display on the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 1-2to search for another signal.

The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC"

presentations using mostly static images are

(MP615P)

generally brighter than "Video" using mostly moving images (movies).

The input signal type effects the options available for the Picture Mode. See "Selecting a picture mode" on page 34 for details.

The native display resolution of this projector is in a 4:3 aspect ratio. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 32 for details.

Changing Color Space (MP625P only)

In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and the projected picture displays wrong colors, please change the color space to YUV.

1.Press Menu/Exit and then press Manual background / Manual background until the SOURCE menu is highlighted.

2.Press Manual background to highlight Color Space Conversion and press Manual background / Manual background to select a suitable color space.

Manual background • This function is only available when the HDMI input port is in use.

The HDMI input port is only available on the MP625P.

Operation 31

Page 31
Image 31
BenQ user manual Switching input signal, Changing Color Space MP625P only