Timing of replacing the lamp
When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. See "Indicators" on page 59 for details.
The following lamp warning displays will remind you to change the lamp.
The warning messages below are for reference only. Please follow the actual
Status | Message |
The lamp has been in operation for 3500 hours. |
|
Install a new lamp for optimal performance. If the |
|
projector is normally run with Economic selected |
|
(See "Setting Lamp mode as Economic" on page |
|
54), you may continue to operate the projector |
|
until the 3950 hour lamp warning appears. |
|
|
|
The lamp has been in operation for 3950 hours. A |
|
new lamp should be fitted to avoid the |
|
inconvenience when the projector runs out of |
|
lamp time. |
|
|
|
The lamp has been in operation for 4000 hours. |
|
It is strongly recommended that you replace the |
|
lamp at this age. The lamp is a consumable item. |
|
The lamp brightness diminishes with use. This is |
|
normal lamp behavior. You can replace the lamp |
|
whenever you notice that the brightness level has |
|
significantly diminished. If the lamp is not |
|
replaced beforehand, it must be replaced after |
|
4000 hours usage. |
|
|
|
The lamp MUST be replaced before the projector |
|
will operate normally. |
|
|
|
Maintenance 55
