5. SYSTEM SETUP: Advanced menu
FUNCTION | DESCRIPTION (default setting/value) | |
(default setting/ | ||
value) |
| |
| Selecting On enables the function and the projector cooling time will | |
Quick | be shortened to a few seconds. | |
| ||
Cooling | If you attempt to restart the projector right after the quick | |
| cooling process, it may not be turned on successfully and will | |
| rerun its cooling fans. | |
High Altitude | A mode for operation in high altitude areas. See "Operating in a high | |
Mode | altitude environment" on page 41 for details. | |
| ||
|
| |
| Allows you to enter the audio setting menu. | |
Audio | Mute | |
Sets the mute function. | ||
Settings | ||
Volume | ||
| ||
| Adjusts the audio volume level. | |
|
| |
| Lamp mode | |
| See "Setting Lamp mode as Economic" on page 54 for details. | |
Lamp | Reset lamp timer | |
See "Resetting the lamp timer" on page 58 for details. | ||
Settings | ||
Equivalent lamp hour | ||
| ||
| See "Getting to know the lamp hour" on page 54 for details on how | |
| the total lamp hour is calculated. | |
|
| |
| Change password | |
Security | You will be asked to enter the current password before changing to a | |
new one. | ||
Settings | Power on lock | |
| ||
| See "Securing the projector" on page 28 for details. | |
|
| |
| Selects a baud rate that is identical with your computer’s so that you | |
Baud Rate | can connect the projector using a suitable | |
download the projector’s firmware. This function is intended for | ||
| ||
| qualified service personnel. | |
|
| |
Test Pattern | Selecting On enables the function and the projector displays the grid | |
test pattern. It helps you adjust the image size and focus and check that | ||
| the projected image is free from distortion. | |
|
|
50 Operation
