Description of each menu
•The default values listed in this manual, especially on pages
1. DISPLAY menu
FUNCTION | DESCRIPTION (default setting/value) | |
(default setting/ | ||
value) |
| |
Wall Color | Corrects the projected picture’s color when the projection surface is | |
not white. See "Using Wall Color" on page 35 for details. | ||
| ||
|
| |
Aspect Ratio | There are four options to set the image's aspect ratio depending on | |
your input signal source. See "Selecting the aspect ratio" on page 32 for | ||
| details. | |
|
| |
Keystone | Corrects any keystoning of the image. See "Magnifying and searching | |
for details" on page 32 for details. | ||
| ||
|
| |
| Displays the position adjustment page. To move the projected image, | |
| use the directional arrow keys. The values shown on the lower position | |
Position | of the page change with every key press you made until they reach | |
their maximum or minimum. | ||
| This function is only available when a PC signal (analog RGB) is | |
| selected. | |
| Adjusts the clock phase to reduce image | |
Phase | distortion. | |
| ||
(depends on the |
| |
selected input |
| |
signal) | This function is only available when a PC | |
| ||
| signal (analog RGB) is selected. |
Adjusts the horizontal width of the image.
H. Size | This function is only available when a PC signal (analog RGB) is | |
| selected. | |
|
| |
Digital Zoom | Magnifies or reduces the projected image. See "Magnifying and | |
searching for details" on page 32 for details. | ||
|
