Manuals / BenQ / Computer Equipment / Projector

BenQ MP625P Function, DESCRIPTION default setting/value, picture mode on page 34 for details

Models: MP625P

1 68

Download 68 pages 14.66 Kb

Page 47

picture mode" on page 34 for details.

2. PICTURE menu

	FUNCTION	DESCRIPTION (default setting/value)
	(default setting/	DESCRIPTION (default setting/value)
	value)
	Picture Mode	Pre-defined picture modes are provided so you can optimize your
	Picture Mode	projector image set-up to suit your program type. See "Selecting a
		picture mode" on page 34 for details.

		Selects a picture mode that best suits your need for the image quality
	Reference	and further fine-tune the image based on the selections listed on the
	Reference	same page below. See "Setting the User 1/User 2 mode" on page 34 for
	Mode	details.
		This function is only available when User 1/2 is selected.

	Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
	Brightness	page 35 for details.
		This function is only available when User 1/2 is selected.

	Contrast	Adjusts the degree of difference between dark and light in the image.
	Contrast	See "Adjusting Contrast" on page 35 for details.
		This function is only available when User 1/2 is selected.

		Adjusts the color saturation level -- the amount of each color in a
	Color	video image. See "Adjusting Color" on page 35 for details.
	Color	This function is only available when User 1/2 is selected.
		This function is only available when User 1/2 is selected.
		This function is only available when a Video or S-Video signal is
		selected and the system format is NTSC or PAL.
		Adjusts the red and green color tones of the image. See "Adjusting
	Tint	Tint" on page 35 for details.
	Tint	This function is only available when User 1/2 is selected.
		This function is only available when User 1/2 is selected.
		This function is only available when a Video or S-Video signal is
		selected and the system format is NTSC or PAL..
		Adjusts the image to make it look sharper or softer. See "Adjusting
	Sharpness	Sharpness" on page 35 for details.
	Sharpness	This function is only available when User 1/2 is selected.
		This function is only available when User 1/2 is selected.
		This function is only available when a Video or S-Video signal is
		selected and the system format is NTSC or PAL.

Operation 47

Image 47

BenQ MP625P Function, DESCRIPTION default setting/value, picture mode on page 34 for details, Tint on page 35 for details

Contents

Welcome MP615P/MP625P Digital Projector User ManualWarranty and Copyright Table of contentsImportant safety Positioning youroperate your projector. Save it for Important safety instructionsSafety Instructions 3. Refer servicing to qualified service personnel4 Important safety instructions Safety Instructions Continued13. Do not place this projector in any of the following environments Safety Instructions Continued6 Important safety instructions Safety Instructions ContinuedIntroduction Projector featuresOptional accessories Shipping contentsStandard accessories See Projector on page 10 for Projector exterior viewFront/upper side 2. Zoom ring Controls and functions Projector3. LAMP indicator light 1. Focus ringCeiling mounting the projector See Using the menus on page 27 for details Remote control1. II Power 6. Volume +See Setting the presentation timer on Replacing the remote control battery14. Timer On 15. Timer SetupSet Rear Table in the SYSTEM SETUP Basic Projector Positioning your projectorChoosing a location Set Front Ceiling in the SYSTEM SETUP BasicPositioning your projector Obtaining a preferred projected image sizeHow to determine the recommended screen size for a given distance Max length Projection dimensionsScreen size Diagonal18 Connection ConnectionTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer Connecting a monitorHDMI Connecting Video source devicesConnecting audio nameTo connect the projector to an HDMI source device Connecting an HDMI source device MP625P onlyTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video/Video source device Connecting an S-Video/composite source deviceStarting up the projector Operationhorizontal angle Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Fine-tuning the image size and clarity2. Use / to highlight the SYSTEM SETUP Basic menu Using the menusIf you forget the password Using a security cable lockUtilizing the password function Setting a password2. Press Mode/Enter. The message INPUT CURRENT PASSWORD displays Entering the password recall procedureChanging the password Disabling the password function30 Operation Changing Color Space MP625P only Switching input signalAbout the aspect ratio Magnifying and searching for detailsSelecting the aspect ratio Auto Scales an image proportionally to fit the 2. Go to the PICTURE Picture Mode menu Optimizing the imageSelecting a picture mode Setting the User 1/User 2 modeAdjusting Contrast Using Wall ColorFine-tuning the image quality in user modes Adjusting Brightness2. Press Mode/Enter and the 3D Color Management page displays About color temperatures3D Color Management 7. Repeat steps 3 to 6 for other color adjustments Increases from 0 to the preset time Setting the presentation timerTo cancel the timer, perform the following steps Presentation Timer pageHow to use the Timer On key? Remote paging operationsHiding the image Freezing the image Utilizing FAQ functionMuting the sound Adjusting the soundAdjusting the sound level Operating in a high altitude environmentShutting down the projector Personalizing the projector menu displaySub-menu Menu operationMenu system Main menu44 Operation 4. SYSTEM SETUP BasicDirect power on SETUPReset lamp timer Change passwordnot white. See Using Wall Color on page 35 for details Description of each menuDESCRIPTION default setting/value default settingFUNCTION DESCRIPTION default setting/valuedefault setting See Adjusting Contrast on page 35 for detailsSee 3D Color Management on page 36 for details See Adjusting Brilliant Color on page 35 for detailsSee Selecting a Color Temperature on page 35 for details See Switching input signal on page 31 for detailsTimer counting direction Timer periodTimer display Timer positionMute Reset lamp timerChange password Power on lockCaption Version Closed Caption Enabledefault setting/ DESCRIPTION default setting/value FUNCTION6. INFORMATION menu Care of the projector MaintenanceCleaning the lens Cleaning the projector caseSetting Lamp mode as Economic Lamp informationGetting to know the lamp hour Extending lamp lifeMessage Timing of replacing the lampSee Setting Lamp mode as Economic on page Status2. Loosen the screw on the lamp cover Replacing the lampprojector and b lifting it off Resetting the lamp timer Light IndicatorsPOWER Power eventsThe projector does not turn on TroubleshootingRemote control does not work The password is incorrectControl SpecificationsOptical ElectricalUnit mm DimensionsCeiling mount installation Ceiling mount screwsSupported timing for PC input Timing chartSupported timing for HDMI input 64 SpecificationsColor sub-carrier Supported timing for Component-YPbPr inputSupported timing for Video and S-Video inputs Disclaimer Warranty and Copyright informationLimited warranty CopyrightWEEE directive Regulation statementsFCC statement EEC statement68 Regulation statements Accessibility Requirements for Rehabilitation Act of 1973, Section