![Carpet cleaning continued](/images/new-backgrounds/179967/17996721x1.webp)
Operations
Carpet cleaning continued
6.Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the
a minute of continuous heated cleaning.
7.Cleaning Strokes. While pressing the trigger, make one slow forward wet pass and another one back. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.
Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can’t see any more water being pulled up.
8.Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water.
8a. Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank.
8b. Remove the top of the tank by lifting up on the handle.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.
6.
Power Switch | Heater Switch |
WARNING:
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
Keep plenty of genuine BISSELL 2X formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
8.8a.
8b.
11
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |