Bissell 9500-p warranty Brush removal and large belt replacement, Maintenance and care

Maintenance and care

Brush removal and large belt replacement

Brushes can be removed for cleaning or replacement as needed.

1.Follow small belt removal Instructions on page 18.

2.Remove brush rolls by pulling them off of the metal rods.

3.Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit.

4.Re-attach the long belt on the bottom to the cogs of the small roller brushes.

5.Place small belt over back roller and metal cog.

6.Place pivot arm in place and screw in place using the silver screw.

7.Re-attach clear end cap by tightening with the (2) black screws.

8.Return front nozzle to front of unit, by latching from underneath and then securing with a screw.

If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call

BISSELL Consumer Care at 1-800-237-7691.

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

2.3.

4.5.

6.7.

19

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1