Maintenance and care
Machine storage
Once your cleaning is complete, make sure the
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete.
1. Flush your machine of any remaining |
residual solution. |
A. Fill the |
clean hot tap water. |
B. Plug your machine into a proper outlet |
and set the Custom Clean dial to the |
rinse setting. Turn the power on by |
pressing the power button. |
C. Recline the handle and press the spray trig- |
ger for 15 seconds while making forward |
and backward passes on carpet. Release the |
trigger to suction. Repeat for another 15 sec- |
onds. Continue without pressing the trigger |
until there is no more water being suctioned. |
2. Turn power and heater switches OFF (O). |
Unplug the machine and wrap the power |
cord. Empty the |
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
Tip:
Let all parts dry completely before storing
3. Rinse out |
tap water, taking care to clean underneath |
the heavy duty bladder, and all around it. |
4. The top half of the tank can be rinsed clean |
through the nozzle area. Also, pop out the |
red filter underneath the top half of the tank |
and rinse out. Replace before putting the |
top and bottom halves of the tank together. |
5. Before you place the cleaned |
tank back onto the machine, simply unscrew |
the floor nozzle using a Phillips head |
screwdriver. This can be rinsed out at the |
faucet. Then replace back onto the machine |
by starting from the bottom of the nozzle and |
hooking the tabs into the holes on the bottom |
sides of the machine. Secure into place with |
the screw. |
3 & 4
Filter
17
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |