Bissell 9500-p warranty Before you clean, Operations, Pretreating optional, Option B CleanShot

Operations

Before you clean

1.Move furniture to another area if cleaning an entire room (optional).

2.Pick up all loose dirt, debris, and pet hair before deep cleaning. If you are cleaning just a small area of carpeting or less than a whole room, the ProHeat 2X may be used to vacuum the area before deep cleaning. Be sure to keep the red filter screen in the 2-in- 1 tank lid free of lint so that suction is maintained (see step 4 on page 17). When you are done vacuuming, clear the red filter screen of any lint and rinse both the dirty water and the clean solution tank (inside the flexible bladder) with warm water before starting the deep cleaning process.

3.Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

4.Pretreating (optional)

Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways.

Option A: BISSELL Tough Stain PreTreat

A.Spray the BISSELL Tough Stain Pre-treat formula onto heavy traffic areas, soiled areas, or stains.

B.Allow to penetrate for at least 3 minutes.

C.Clean as normal, using the BISSELL ProHeat 2X machine on the high traffic setting, following the instructions below.

Option B: CleanShot

Follow instructions on page 12.

	9
EXIT	10	8	———
11
12	7		3'
			1	———
	6
5		2
	3
	4

ATTENTION:

Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 15.

9

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1