Operations
Cleaning with attachments
Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more.
1.Important! If using to clean uphol- stery, check upholstery tags.
A.Check manufacturer’s tag before clean- ing. “W” or “WS” on the tag means you can use your ProHeat 2X. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
B.Check for colorfastness in an incon- spicuous place.
C.If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
D.Plan activities to allow upholstery time to dry.
E.Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.
2.Follow the instructions on page 10 for filling the
3.Set ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose.
4.Set custom clean dial for heavy traffic, normal clean, light clean, or water rinse as desired.
5.Attach the cleaning tool to the end of the hose.
6.Plug in and turn on the power switch and heater (if desired).
7.Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed.
Caution: Do no overwet.
Manufacturer’s tag
WARNING:
To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
5.
13
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
