Model # 900149: Page 11
TROUBLESHOOTING
Dispenser does not operate.
"Make sure the power cord is properly connected to a working outlet.
Water is leaking.
"Bottle may have a leak. Remove bottle and replace with new bottle.
"If leak remains, remove probe from bottle and call
No water is coming from the taps.
"Make sure the bottle is not empty. If so replace it.
"Make sure to push the water controls in fully.
"Make sure the probe connection with the water bottle forms a complete seal.
"Make sure the door is closed.
Cold water is not cold.
"It takes up to one hour after setup to secure cold water.
"Make sure the back of the dispenser is at least 4 inches from a wall and there is free airflow on all 4 sides of the dispenser.
"Make sure energy saving switch is ON.
Hot water is not hot.
"It takes
"Make sure the power cord is properly connected to a working outlet.
"Make sure energy saving switch is ON.
Dispenser is noisy.
"Make sure dispenser is level.
Water tastes bad.
"Drain water from reservoirs and replace bottle with a fresh one.
"Sanitize dispenser per Proper Care & Cleaning instructions.
Nightlight Isn’t Working
"Make sure the power cord is properly connected to a working outlet.
"Bulb could be out. Call
Nightlight Is Flashing
"This indicates bottle is empty. Replace bottle.
