Black & Decker BLC18750DMB, BLC18750DMS How to Use, Getting Started, How To Use Mode Function G

Models: BLC18750DB BLC18750DMB BLC18750DMS

1 27
Download 27 pages 845 b
Page 4
Image 4
How to Use

How to Use

This unit is for household use only.

GETTING STARTED

Remove all packing material and any stickers from the product.

Wash all removable parts as instructed in CARE AND CLEANING section of this manual.

Note: When in use, do not leave blender unattended. When using hard foods, such as ice, cheese, nuts and coffee beans, keep one hand on lid to keep blender in place.

5.Press POWER button. Select speed and function following directions below.

6.When finished, press START/STOP button. Make sure blades have completely stopped before attempting to remove blending jar from base.

7. To remove jar, grasp handle, turn slightly counterclockwise to unlock position and lift up (F).

EE GETTING STARTED

C

Important: This blender has an intelligent system that automatically shuts off the appliance after 2 minutes for speeds 1 to 18 and after 20 seconds for the PULSE and CRUSH functions. If this occurs, the LED display shows "EE"; unplug the unit and wait 30 seconds (C).

8. Remove lid to pour.

9. Always unplug appliance when not in use

F

HOW TO USE MODE FUNCTION (G)

BLENDER JAR ASSEMBLY

1.Turn blender jar upside-down and place flat on countertop or work surface.

2.Put the gasket on top of the blade assembly.

3.Place the blade assembly with gasket in bottom opening of the jar, with blades down.

When blender is plugged in and POWER button is pressed, speed will be shown at 1 on display in center of control panel and red light below SPEED indicator light in MODE section of control panel will flash.

D

OZS

CUPS

4.Place jar base onto blending jar and rotate clockwise until it is tight (D).

5.Turn assembled blending jar right side up.

6.Place lid with lid cap on blending jar.

7.Uncoil power cord from storage area under base.

8.Place jar in unlocked position on base and turn jar clockwise until jar is in locked position on base (E).

9.Blender is now ready for use.

G

1

H

TO SIMPLY RUN THE BLENDER

1.Press HOW TO USE MODE FUNCTION (G) button below digital display in center of control panel to select speed that best suits your desired task. Digital display will show number of speed selected (H).

2.Press START/STOP button and blender will run until STOP/START button is depressed again.

E

HOW TO USE

1.Make sure appliance is OFF.

2.Place foods to be blended into jar.

3.Place lid on jar; make sure lid cap is in place.

Important: Do not remove lid while blender is running.

4.Plug power cord into standard electrical outlet.

BLENDER JAR ASSEMBLY 30TO SIMPLY RUN THE BLENDER

J

TO USE THE TIMER (J)

1.Press HOW TO USE button to select speed that best suits your desired task. Digital display will show number of speed selected.

2.Press and release MODE button to select TIMER. The red light will be illuminated above TIMER indicator. Digital display will show 00.

3.Press Important: Do not remove lid while blender is running. button and timer will change in 5 second increments up to a maximum of 60 seconds.

5

6

Page 4
Image 4
Black & Decker BLC18750DMB, BLC18750DMS manual How to Use, Getting Started, How To Use Mode Function G, Blender Jar Assembly