English
Preset Cooking
To set the appliance to finish cooking at a given time, first ensure that the current time displayed is correct. If not, correct it.
Select the required cooking mode & cooking time (if applicable), then press the “Preset” button (16 ). The figures and the small arrow will flash in the LCD display. Pressing the minute button will increase the time shown in 10 minute increments. Pressing the “Hour” button will increase the time shown in 1 hour increments.
Once the required finish time is shown, press the “Start / Reheat” button (15 ).
Cleaning
All parts of the appliance should be cleaned with a clean damp cloth only. The steam tray (11), cooking bowl (8), inner steam vent
(9)and outer steam vent (2) can be washed in warm soapy water. Rinse with clean water and dry thoroughly with a dry soft cloth. The outer steam vent (2) can be taken apart to facilitate cleaning. Turn the outer steam vent
All other parts should be washed in warm softly water rinse with clean water and dry thoroughly with a dry soft cloth. The cord set (28) must be removed before the appliance is cleaned. The appliance inlet
(29)must be dried before the appliance is used again.
Note: Do not use abrasives or chemical cleaners on any part of this appliance.
Technical data
|
| RC75 |
Voltage | V | |
|
|
|
Power | W | 765 |
|
|
|
Frequency | Hz | 50/60 |
|
|
|
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose it off with other household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again. Use of
recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorized repair agent who will collect them on our behalf. You can check the location of your nearest authorized repair agent by contacting your local Black & Decker office at the address indicated in this manual. A list of authorized Black & Decker repair agents and full details of our
11
