English
Before First Use
Note: This appliance is fitted with a battery, so the LCD panel will show the Rice Cooker icon and the time, even when it is not connected to an electrical supply.
Note: Should the power supply fail during cooking, the product will stop working. If the power supply reconnects within 1 hour, the internal battery will allow the appliance to continue to operate from where it stopped.
Setting the Clock
To set the clock, first connect the appliance to a suitable electrical supply. Press & hold the “Minute” button (19) until a beep is heard. The background will become green
&the current time will flash. Each press of the “Minute” button will advance the time by one minute. Holding the button down will advance the time more quickly.
Each press of the “Hour” button (17) will advance the time by one hour. Holding the button down will advance the time more quickly. Pressing the "Keep Warm / Cancel" button ( 14 ) will set the time.
Use
To Cook Rice
Place the appliance on a flat, even surface. Open the lid (1) by pressing the lid release button (3). Using the measuring cup (12) provided, add the required amount of rice to the cooking bowl (8) then add the required amount of water. Check that the outside of the bowl is dry then place it into the appliance, rotating the bowl to ensure correct contact with the cooking plate.
Close the lid.
Fit the cord set (28) into the appliance inlet
(29)& connect the appliance to a suitable electrical supply.
The Rice Cooker will enter “Stand By” mode, and the LCD display (4) will show a green background for approximately 30 seconds. A yellow lamp in the Start / Reheat Button (15) will flash until a cooking mode is selected.
Press the Function Button (13) once. A small arrow in the LCD Display will indicate
that “Rice” is the selected cooking mode (21).
Press the Start / Reheat Button (15). The yellow lamp in the button will now stay lit during cooking.
After the first stage of cooking is completed, the appliance will enter "Simmer" mode. The display will count up to the default simmering time of 10 minutes.
When the rice is cooked, the appliance will emit a series of beeps.
The appliance has entered the “Keep Warm” mode when the Start / Reheat button lamp goes out, and the yellow lamp in the “Keep Warm / Cancel” button lights up. The background of the LCD will also change to orange.
If a smaller quantity of rice is to be cooked (less than 2 cups), a special “Small Volume Rice” mode is available.
This is similar to cooking larger amounts of rice, but is selected by pressing the Function Button (13) twice. The small arrow in the LCD Display will indicate that “Small Volume Rice” is the selected cooking mode (20).
Press the Start / Reheat Button (15). The yellow lamp in the button will stay lit during cooking.
After the first stage of cooking is completed, the appliance will enter “Simmer” mode. The display will count up to the default simmering time of 7 minutes.
When the rice is cooked, the appliance will emit a series of beeps. The appliance has entered the “Keep Warm” mode when the Start / Reheat button lamp goes out, and the yellow lamp in the “Keep Warm / Cancel” button lights up. The background of the LCD will also change to orange.
Once any cooking mode is completed, disconnect the appliance from the electrical supply before opening & serving.
To Cook Soaked Rice:
Place the appliance on a flat, even surface.
Open the lid (1) by pressing the lid release button (3). Add the required ingredients & water to the cooking bowl (8).
