ROUTER BITS (FIG. K) (NOT INCLUDED)
•Do not use router bits with a diameter greater than
Description | Application |
Straight bit (1) | Grooves and rabbets |
Trimming bit (2) | Trimming laminates or hardwood; accurate profiling using a |
| template |
Rabbiting bit (3) | Rabbets on straight or curved workpieces |
Grooves, engraving and edge beveling | |
Core box bit (5) | Fluting, engraving and decorative edge moulding |
Cove bit (6) | Decorative edge moulding |
Ogee moulding bit (7) | Decorative edge moulding |
Rounding over bit (8) | Rounding over edges |
Dovetail bit (9) | Dovetail joints |
Chamfer bit (10) | Chamfer edges |
Troubleshooting
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Cord not plugged in. | • Plug in cord. |
| • Circuit fuse is blown. | • Replace circuit |
|
| fuse. |
| • Circuit breaker is tripped. | • Reset circuit |
|
| breaker. |
| • Cord or switch is damaged. | • Have cord or |
|
| switch replaced |
|
| at Black &Decker |
|
| Service Center or |
|
| Authorized |
|
| Servicer |
For assistance with your product, visit our website www.black&decker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
MAINTENANCE
WARNING: To prevent personal injury, always disconnect plug from power source before performing any maintenance. Failure to do so could result in accidental starting and possible injury.
•Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
•Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent- based cleaner.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: To reduce the risk of injury, do not use accessories rated below the maximum speed on the rating plate of the tool.The use of any accessory not recommended for use with this tool could be hazardous.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
11
