Manuals / Black Box / Computer Equipment / Network Hardware

Black Box ACS4222A-R2-xx, ACS2009A-R2-xx, ACS2228A-R2-xx ACS4001A-R2-xx manual Service Setup

Models: ACS2028A-R2-xx ACS2209A-R2-xx DVI-D-Fiber-KVM-Extender Single and DualHead ACS2009A-R2-xx ACS2228A-R2-xx ACS4001A-R2-xx ACS4222A-R2-xx ACS4022A-R2-xx ACS4201A-R2-xx

1 58

Download 58 pages 24.26 Kb

Page 31

Image 31

SERVICE SETUP

4.Service Setup

For most applications, you shouldn't need not to make any adjustments to set up your DVI-D Fiber KVM-KVM-Extender. Under some special circumstances it could be necessary to setup configuration specials.

For some applications, you may need to open the Local Unit and/or the Remote Unit. Unscrew the Philips-type screws at both sides at the bottom of the device. Carefully displace the lower and upper shells of the case.

Fastening screw on the bottom of the device

The diagnostic LED ‘Video OK’ is located at the local unit between the both DVI connectors

Diagnostic LED

Video OK

The diagnostic LED ‘Link Status’ is located near to the Fiber-connectors

Diagnostic LED

Link Status

(Fiber)

Page 31

Image 31

Black Box ACS4222A-R2-xx, ACS2009A-R2-xx, ACS2228A-R2-xx ACS4001A-R2-xx, ACS4022A-R2-xx ACS4201A-R2-xx manual Service Setup