DVI-D FIBER KVM-EXTENDER
4.1Setup at the Local Unit
After unscrewing and opening the upper shell, please place the device in this orientation: with the Fiber connectors to the right and the electrical connectors to the left.
The main PCB then will look like this:
JP1, JP2, JP3
Use the diagram to locate jumpers.
DDC
You can select, whether the DDC is taken from internal DDC table or from local monitor or the DDC information could be downloaded from remote monitor and stored into internal table.
DDC | JP1 | JP2 |
From internal Table
From local Monitor
Loading the DDC Information from the Remote Monitor into the internal DDC Table (see also below: Loading the DDC Information from the Remote Monitor into the internal DDC Table) (default)
32
