Black Box VX-HDMI-IP-UTX, VX-HDMI-IP-VTX, VX-HDMI-IP-MRX, VX-HDMI-IP-VRX Function Button, Overview

Chapter 2: Overview

source, cable, and display device used. Low-quality cables degrade output signals, causing elevated noise levels. Use the proper cable and make sure the display device can handle the resolution and refresh rate selected.

NOTE: The system will disable the video output signal when it detects non-HDCP-

compliant display(s) trying to play on the HDCP video source. All the connected output displays MUST be HDCP compliant when the video source is HDCP compliant.

2.6.4 Function Button

The Function button on the extender units operates as described in Table 2-3.

	Table 2-3. Function button.
Action	Description
Press for 1 second.	Toggle between graphics and
	video mode.

1. Press and hold the Function button.

2.Apply power to the receiver unit.

3.Release right after the Network Status LED starts blinking.

EDID copy (Receiver unit only!)

724-746-5500 blackbox.com Page 17