![](/images/new-backgrounds/1187585/18758583x1.webp)
CHAPTER 4: AT Commands, S-Registers, and Result Codes
Command: | DS=y | Dial Stored Telephone Number |
Values: |
| |
Default: |
| none |
Description: |
| Dial a number previously stored in directory |
|
| number y by the &Zy=x command. |
|
| Example: ATDS=1 |
Command: | En | Echo Command Mode Characters |
Values: |
| n=0 or 1 |
Default: |
| 1 |
Description: | E0 | Do not echo keyboard input to the terminal. |
| E1 | Do echo keyboard input to the terminal. |
Command: | Fn | Echo Online Data Characters |
Values: |
| n=1 |
Default: |
| 1 |
Description: | F0 | Enable online data character echo. (Not |
|
| supported.) |
| F1 | Disable online data character echo (included for |
|
| backward compatibility with some software). |
Command: | Hn | Hook Control |
Values: |
| n=0 or 1 |
Default: |
| 0 |
Description: | H0 | Go |
| H1 | Go |
Command: | In | Information Request |
Values: |
| |
Default: |
| None |
Description: | I0 | Display default speed and controller firmware |
|
| version. |
| I1 | Calculate and display ROM checksum (for example, |
|
| 12AB). |
| I2 | Check ROM and verify the checksum, displaying |
|
| OK or ERROR. |
| I3 | Display default speed and controller firmware |
|
| version. |
| I4 | Display firmware version for data pump |
|
| (for example, 94). |
| I5 | Display the board ID: software version, hardware |
|
| version, and country ID. |
41