ServSensor EXP DC16
Figure 4-3. SNMP Trap screen.
5. Fill in the following information:
•Enter a name for the SNMP notification.
•Enter the IP address of the SNMP trap.
6.Press the “Add Trap Destination” button.
7.Input another trap or click the “Next” button. The screen shown in Figure 4-4 appears.
Figure 4-4. SNMP Trap Notification screen.
8.Enter the Maximum Times to Resend and the Resend Intervals (secs). These parameters set the maximum number of times to send the trap notification and the time interval between each notification.
9.Click “Next,” and the following screens will appear. On these screens, you can select the parameters for when to send the SNMP trap notification.
Page 20 |
