![3.2.2 Setup of Upgrade Modules](/images/new-backgrounds/149204/14920473x1.webp)
Chapter 3: Installation
3.2.2 Setup of Upgrade Modules
You can
Upgrade Module Analog Audio/Serial:
1.Connect the audio source with the CPU module (for example, CPU audio output with audio input, CPU audio input with audio output).
2.Connect the audio output at the CON module with headphones or suitable speakers.
3.Connect the audio input at the CON module with a suitable microphone.
Upgrade Module Digital Audio:
1.Connect the digital audio source with the suitable audio input of the CPU module.
2.Connect the audio output of the CON module with suitable speakers or audio amplifiers.
NOTE: If several active sources are connected,
1.Connect the CPU with the CPU module
2.Connect the
3.2.3 Setup of USB 2.0 Modules
1.Connect the CPU with the CPU module (USB 2.0).
2.Connect the USB 2.0 devices with the CON module (Connect to USB 2.0 devices).
3.3 Example Applications
This section illustrates typical installations of DKM Modular Extenders:
1 | 2 | 3 | 4 |
5
Figure
ACX1MT | Page 37 | |
|
|