Set Up Your BlackBerry Pearl
Insert the BatteryCharge the Battery
Insert the Battery | Charge the Battery |
Steps?
3
Takes?
1 minute
Note:
If the battery is charged, the device turns on. If the device does not turn on, charge the battery.
1.Press the battery cover release button, slide the battery cover ahead
slightly and remove the battery cover. The battery cover release button is at the bottom of your BlackBerry Pearl
2.Insert the battery so that the BlackBerry logo faces up and the metal contacts on the battery align with the metal contacts on your device.
3.Slide the battery cover back onto the device so that the cover lies flat and clicks into place.
1.Connect the small USB end of the AC charger cable to the USB port on the side of your BlackBerry device.
2.Pull the plug blades down.
3.Plug the AC charger into a power outlet.
4.Charge the battery to full power.
Battery power level indicators
full battery power
low battery power
battery charging
Steps?
4
Takes?
1 minute
Note:
If you have an available USB port on your computer, you can use the USB cable that came with your device to connect your device to your computer for charging.
www.cingular.com/tutorials/blackberrypearl
