INSTALLATION
7) ELECTRICAL CONNECTION
The appliance is supplied with a 1800 mm long flexible supply lead.
The point of attachment for this lead is located at the rear and on the underside of the appliance 380 mm from the right hand side.
The voltage and power consumption are detailed on the underside of the appliance. Ensure that the appliance is correctly rated to the supply.
Connect appliance by way of a switched power point.
THEAPPLIANCEMUSTBEEARTHED
Ensure that this power point is properly earthed. Look at the connection wiring diagrams (fig. 12 or 12/A).
a) Data Label
The Data Label is located on the underside of the hotplate. A duplicate Data Label is supplied to adhere in an accessible area next to the hotplate. This hotplate is suitable for Natural Gas and Universal LPG; ensure that the available gas supply matches the Data Label.
b) Before Leaving
Check that there are no gas leaks, but do not use a naked flame to detect gas leaks. Ignite all burners to ensure correct operation of gas valves, burners, ignition and if fitted, flame failure valves. Turn gas taps to low flame position and observe stability of the flame. When satisfied with the hotplate, please instruct the user on the correct method of operation. In case the appliance falls to operate correctly after all checks have been carried out, refer to the authorised service provider in your area.
FIG. 12
FIG. 12/A
8
