42
Radio mode
Radio mode

Adjusting the tuner

To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the region
in which it was sold. If you experience prob-
lems with your radio reception, please check
this setting.
The radio functions described in these oper-
ating instructions refer to the tuner setting
EUROPE.
Switch off the device by pressing button
2.
Hold the buttons 3 = and AUDIO <
pressed at the same time and switch on
the device again with button 2.
The current setting is displayed.
Select your tuner region with the or
button 5.
To save the setting and to exit the menu,
press the M/OK button >.

Switching to radio mode

If you are in SD, CD changer or AUX-IN
mode,
press the BND/TS button 4
or press the SRC button ? repeatedly
until the display shows "TUNER".
쏅
쏅
쏅
쏅
쏅
쏅
쏅

Convenient RDS functions

This device is equipped with an RDS (Ra-
dio Data System) radio receiver. Many FM
stations broadcast a signal that not only
carries the programme but also additional
information such as the station name and
programme type (PTY).
The station name appears on the display as
soon as the tuner receives it.
The convenient RDS functions AF (Alterna-
tive Frequency) and REGIONAL extend your
radio’s range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some
radio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated (REG ON/OFF) separately in the
menu.
Switching the RDS function on/off
If you want to use the RDS functions AF and
REGIONAL,
press and hold the TRAF button 7 for
longer than two seconds.
The RDS function is active if RDS appears
on the display.
•
•
쏅
02_CanbSydMelbSD27_eng.indd 4202_CanbSydMelbSD27_eng.indd 42 15.01.2007 14:59:57 Uhr15.01.2007 14:59:57 Uhr