Blaupunkt 7 647 523 310 Setting the sensitivity of station seek tuning, Storing stations, Storing stations automatically (Travelstore) , Listening to stored stations, Scanning receivable stations (SCAN)

Radio mode

Setting the sensitivity of station seek tuning

You can choose whether the radio should

only tune into stations providing good recep-

tion or whether it can also tune into those

with a weak reception.

Press the M/OK button >.

The display shows "MENU".

Press the or button 5 repeatedly

until "SENS" and the currently set value

appears on the display.

"SENS HI6" means that the tuner is set to the

highest sensitivity setting. "SENS LO1" means

it is set to the lowest sensitivity setting.

Press the M/OK button > to change the

set value.

Set the desired sensitivity level using the

or button 5.

When you have ﬁ nished making your chang-

es,

press the M/OK button >.

To exit the menu,

press the ESC button 6 or wait approx.

8 seconds.

Note:

You can set different sensitivity levels

for FM and AM (MW/LW).

Storing stations

Storing stations manually

Select the desired memory bank (FM1,

FM2, FMT) or one of the wavebands (MW

or LW).

Tune into the desired station.

Press and hold down one of the station

buttons 1 - 5 = for longer than two sec-

onds to assign the station to that button.

쏅

Storing stations automatically (Travelstore)

You can automatically store the ﬁ ve stations

offering the strongest reception in the region

(only FM). The stations are stored in the FMT

memory bank.

Note:

Any stations that were previously

stored in this memory bank are deleted

in the process.

Press and hold down the BND/TS button

4 for longer than two seconds.

The storing procedure begins. "FM TSTORE"

appears on the display. After the process

has completed, the radio will play the station

that is stored in memory location 1 of the

FMT memory bank.

Listening to stored stations

Select the memory bank or waveband.

Press the station button 1 - 5 = of the

desired station.

Scanning receivable stations (SCAN)

You can use the scan function to play all the

receivable stations brieﬂ y. You can set the

scanning time from 5 to 30 seconds in the

menu (in increments of 5 seconds).

Starting SCAN

Press and hold down the M/OK button

> for longer than two seconds.

Scanning begins. "SCAN", the station name

or the frequency are intermittently shown on

the display.

쏅

Radio mode

02_CanbSydMelbSD27_eng.indd 4402_CanbSydMelbSD27_eng.indd 44 15.01.2007 14:59:57 Uhr15.01.2007 14:59:57 Uhr