Blaupunkt 7 647 523 310 Selecting the waveband/memory bank, Tuning into a station

Radio mode

To deactivate,

￿press and hold the TRAF button 7 for longer than two seconds.

￿The RDS symbol disappears from the display.

Switching REGIONAL on/off

￿Press the M/OK button >. The display shows "MENU".

￿Press the or button 5 repeatedly until "REG ON" or "REG OFF" appears on the display.

To switch REGIONAL on/off,

￿press the or button 5.

￿Press the M/OK button >. To exit the menu,

￿press the ESC button 6or wait approx. 8 seconds.

Selecting the waveband/memory bank

This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.

Five stations can be stored in each memory bank.

To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,

￿briefly press the BND/TS button 4.

Tuning into a station

There are various ways of tuning into a sta- tion.

Automatic station seek tuning

￿Press the or button 5.

The radio tunes into the next receivable sta- tion.

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manu- ally if the RDS function is deactivated.

￿Press the or button 5.

Browsing through broadcasting networks (FM only)

If radio stations provide several programmes, you have the option of browsing through these so-called "broadcasting networks".

Note:

The convenient RDS function must be activated before you can use this feature.

￿Press the or button 5 to change to the next station of the broadcasting network.

Note:

When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.

DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

43