47
DANSK
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Traffi c information
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network. Whenever a traffi c announcement
(TA) is broadcast, the system switches auto-
matically from a station that does not pro-
vide traffi c reports to the appropriate traffi c
information station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
In addition, the device offers the option of
receiving traffi c announcements even during
the operation of SD/MMC, CD changer and
external sources (AUX-IN). For this purpose,
activate the priority for the traffi c informa-
tion.

Switching traffi c information

priority on/off

Briefl y press the TRAF button 7.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
traffi c information station that the
system is tuned into while listening
to an SD, a CD in the changer or AUX-
IN, and the subsequent automatic
search cannot fi nd a new traffi c
information station.
If you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
쏅
•
•
If you hear the warning beep, you can
either switch off traffi c information
priority or tune into a station that
broadcasts traffi c information.

Skipping a traffi c announcement

"TRAFFIC" is displayed during a traffi c an-
nouncement. To cancel a traffi c announce-
ment without switching off the priority of
traffi c information:
During the traffi c announcement, press
the TRAF button 7 once.
The previously active audio source is played
again. If a traffi c announcement is broadcast
again, the device automatically switches it
through again.

Setting the volume for traffi c

announcements

Press the M/OK button >.
The display shows "MENU".
Press the or button 5 repeatedly
until "TA VOLUME" appears on the dis-
play.
Press the M/OK button > to display
the submenu.
"TA VOL" and the currently set value are
displayed.
Set the desired volume using the or
button 5.
When you have fi nished making your chang-
es,
press the M/OK button >.
To exit the menu,
press the ESC button 6 or wait approx.
8 seconds.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_CanbSydMelbSD27_eng.indd 4702_CanbSydMelbSD27_eng.indd 47 15.01.2007 14:59:58 Uhr15.01.2007 14:59:58 Uhr