Radio operation
Selecting a waveband
With this car radio you can select between the following wavebands:
FM 87.5 – 108.0 MHz
AM 531 – 1602 kHz
•Select the desired waveband by pressing the BA/TS button.
Station tuning
Automatic seek tuning 
/
•Press 
or 
; the car radio will auto- matically search for the next station.
If you hold 
/
pressed up or down on the rocker switch, seek tuning will speed up in the upwards or downwards direction.
Automatic seek tuning
Up
Down
Manual tuning with << >>
You can also tune into a station manually.
•Press << >>; the frequency will
change in short intervals in the down- wards or upwards direction.
If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.
Switching between the memory banks (FM)
You can switch between the memory banks FM1, FM2 and FMT in order to store sta- tions and recall them later.
The currently selected memory bank ap- pears in the display.
•Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.
Storing stations
On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (FM1, FM2, FMT).
You can also store six stations on AM.
•Select the waveband by pressing BA/TS.
•Tune into a station with the rocker switch (either automatically 
/
or manually << >>).
•Press the desired preset button until the radio resumes play after the mut-
ing (takes approximately 2 seconds) or until you hear a beep.
Now the station has been stored.
The display will temporarily indicate which preset button is currently activated.
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing BA/TS. For FM, also choose the cor- responding memory bank by pressing the BA/TS button as many times as necessary until the desired bank ap- pears in the display.
•Press the corresponding preset button briefly to recall the station.
Scanning stations with
Preset Scan
You can scan all of the radio stations on AM or FM.
The scanned stations of the current wave- band will appear briefly one after the other in the display.
Start Preset Scan:
•Press PS briefly.
ENGLISH
11
