Press the button indicating the oppo-
site direction, 
or 
/
to stop tape winding.
Changer mode (optional)
Select CD
Up
Down
Select track
>>Up: press briefly
CUE - fast forward (audible): hold button down.
<<Down: press two or more times briefly
Repeat track: press once briefly.
REVIEW - fast reverse (audible) - hold button down.
Additional rocker switch functions:
For additional settings use
AUD;
DSC-MODE 4
Important: The corresponding func- tion must be active.
:SRC (Source)
Press button briefly to select the oper- ating mode (tuner, cassette, changer or
;AUD
Treble and bass adjustment
You can store different settings for the
FM, AM, cassette,
Setting the tone:
•Select the operating mode. Press AUD once and use the rocker switch to set the tone.
Treble +
Treble -
<<Bass -
>>Bass +
For Fader and balance adjustment: press AUD twice.
Fader front Fader rear
<<Balance left
>> Balance right
The selected values will appear in the display. The last setting is stored au- tomatically.
Switching AUD off: Press the button again briefly.
If you do not make any adjustments to the tone within 8 seconds, the AUD mode will quit automatically.
<LD: Loudness
Loudness boosts the bass frequency at low volume.
Loudness on/off: Press LD briefly. “LD” will appear when this setting is active.
Refer to the section on DSC program- ming to adjust Loudness to different levels.
=
DIS - Clock display
This unit is equipped with an internal clock.
Display priority
To alter the display priority, press 
until you hear a beep. Repeat this pro- cedure until the desired display ap- pears.
Temporary display change Press 
briefly as many times as needed to show the desired informa- tion for a few seconds.
Radio mode
Press this button to switch between the clock, the station name and the frequency.
6
