Naming CDs

To allow you to identify your CDs more quickly, you can use DSC programming to enter individual names for up to 99 CDs. The names can have up to 7 characters.

If you attempt to enter more than 99 names, “FULL” will appear in the display. The CD name has priority over the CD number in the display when manually changing CDs.

Proceed as follows:

Select DSC programming mode.

Press DSC.

Press / to select CDC_NAME.

Press << >> to enter the select mode.

Press / to select the CD you want to name.

Press << >> to switch to the editing mode. If the CD you have selected does not already have a name, 7 dashes “_” will appear in the display.

The cursor will flash at its current po- sition. Press << >> to move it.

Press / to select the character you want to enter. Select a dash “_” to leave a blank space.

Press DSC to store the name. The main CDC_NAME menu will appear again in the display.

If you want to alter a name which has al- ready been entered, select that CD in the DSC mode and overwrite it in the editing mode. If you want to change individual let- ters only, press << >> to move the cursor to the corresponding position and change that letter.

LIST

In DSC mode (Direct Software Control) it is possible to assign names to your CDs. In LIST mode you can view these names without interrupting CD playback. If you have not named the CDs, the display will list the numbers only.

To enter LIST mode:

Press 6/LIST, “LST” will appear in dis- play field 1

Press / to see CD names

If you see a CD you want to hear, press << >> to select that CD and it will begin to play.

If you don't select a CD, the LIST mode will automatically end after 8 seconds.

Note:

In order for names to be seen in the LIST mode, the named CD must have been se- lected at least once since the magazine was inserted.

Deleting CD names

Deleting one CD name

Proceed as follows:

Select DSC programming mode.

Press DSC.

Press / to select CDC_NAME.

Press << >> to enter the CD select mode.

Press / to select the name you want to delete.

Press DSC and hold it down. After 2 seconds you will hear a beep and “ONE_NAME” will appear in the dis- play.

Release DSC after 2 seconds but be- fore 8 seconds. “DELETED” will ap- pear in the display.

The name of this CD has now been deleted. The main CDC_NAME menu will appear again in the display.

ENGLISH

17

Page 17
Image 17
Blaupunkt CM 168 operating instructions Naming CDs, Deleting CD names, Deleting one CD name