The preset station indication (e.g. P1) will flash in the display
Listen to scanned station/end Preset Scan:
•Press PS briefly.
Scanning stations with
Radio Scan
You can scan through all of the stations in your reception area.
To start the Scan function:
•Press SCA briefly.
The scanned frequency or the station name will start flashing in the display.
During the actual scanning process “SCAN” will appear in the display.
Listen to scanned station/end Radio Scan:
•Press SCA briefly.
You will hear the current selected station.
Changing the scan time
The scan time can be selected from be- tween 5 to a maximum of 20 seconds.
If you would like to alter the scan time, please refer to the section on “DSC pro- gramming - SCANTIME”.
Selecting the automatic tuning sensitivity
You can alter the automatic tuning sensi- tivity.
If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity). If “lo” does not light up, the radio will also pick up weaker, more distant stations (high sensitivity).
If you would like to alter the sensitivity level please refer to the section on “DSC pro- gramming - SENS”.
Automatically storing the strong- est stations with Travelstore
You can automatically store the six FM / AM stations with the most powerful signals in your current reception area sorted ac- cording to their signal strength. This func- tion is particularly convenient on longer trips.
•Press the BA/TS button to select the waveband.
•hold the BA/TS button for 2 seconds down.
If the AM band is active, the six strongest AM stations will be automatically stored in the AM memory bank.
When this process has been completed, the radio will play the strongest station.
If desired, stations can also be stored man- ually in the Travelstore bank (see “Storing stations”).
Naming radio stations
To enable you to pick out your favorite ra- dio station more quickly, DSC programming allows you to give up to 30 radio stations individual names.
The radio station does not have to be stored in the memory bank. The names are linked to the radio frequencies.
Proceed as follows:
Select the DSC mode.
•Press DSC.
•Press 
/
to select
•Press << >> to switch to the station- select mode.
•Press 
/
to select the station you would like to name.
•Press << >> to confirm your selection.
•Now you are in the edit mode. If the station selected does not have a name, 8 dashes “_” will appear in the display.
12
