DSC programming
The car radio has been equipped with DSC (Direct Software Control) to allow you to customize certain programmable, basic settings to suit your personal needs and preferences and then store them.
The basic settings for this car radio were made at the factory.
In the following you can find an overview of these settings, so that you can always re- set to them if desired.
If you wish to alter any of the programming,
•press DSC.
“MENU 
/
” will temporarily appear in the display.
Use the 
/
buttons of the rocker switch to select the function you wish to change. The display will show you the setting you have selected. Press the << >> buttons of the rocker switch to change the settings and exit the current mode. Confirm the setting you have selected by pressing the DSC button.
LOUDNESS Loudness boosts the bass frequencies at low volume. LOUD 1 - Low boost LOUD 6 - Max. boost
BAS CENT Bass Center Frequency Ad- justment.
Adjusts the
STA NAME Allows you to name up to 30 radio stations based on their frequency.
SENS LO Adjusts seek tuning sensitivity.“LO” stands for local reception.“DX” stands for distant reception. Select “LO” if you want to receive strong stations in the local area, select “DX” if you want to tune into weak- er stations which are further away.
CLOCK 12 Switches between
CLOCKSET Sets the clock manually. Press << >> to select hours/minutes. Press 
/
to adjust the flashing value.
TIMER 1 The radio will automatically switch to a station you have selected at the time you program.
TIMER 2 You can also program the unit to go to a second sta- tion at a programmed time.
ON VOL Sets the
TOM ON/OFF
You can enter a message of up to 40 characters which appears in the dis- play when you switch the unit on.
|
| CDC NAME Names CDs. A maximum of |
/ | Select function | 99 CDs can be given names |
<< >> | Adjust/recall setting | of up to 7 characters. |
20
