Blaupunkt Hamburg CD70 Clock Time, Setting the time, Selecting 12/24-hour clock mode

TIME

CLOCK - Time

Setting the time

The clock time can be automatically set by means of the RDS signal. If you cannot re- ceive an RDS station, or if the RDS station to which you are listening does not support this function, it is also possible to set the time manually.

Having the time set automatically

➮In order to have the time set automati- cally, press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “CLK MAN” (manu- al) to appear in the display.

If “CLK AUTO” is displayed, automatic time setting is already active.

➮Press the button, 7, as often as is necessary for “CLK AUTO” to appear in the display.

➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

If “CLK AUTO” has been selected and a sta- tion with the RDS time function (RDS-CT) is received, the clock is automatically adjusted.

Setting the time manually

➮In order to adjust the time, press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “CLOCKSET” to ap- pear in the display.

➮Press the or button, 7.

The time is shown on the display. The hours blink and can be adjusted.

➮Adjust the hours with the / button,

7.

➮When the hours have been set, press the button, 7.

The minutes blink.

➮Adjust the minutes with the / but- ton, 7.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Selecting 12/24-hour clock mode

➮Press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “24 H MODE” or “12 H MODE” to appear in the display.

➮Press the or buttons, 7, to switch between the modes.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Having the time displayed constantly when the device is switched off

➮If you want the time to be displayed when the device is switched of and the

ignition is switched on, press the MENU button 8.

➮Press the or button, 7, as often as is necessary for “CLK OFF” or “CLK ON” to appear in the display.

➮Press the or button, 7, to switch between the display being ON or OFF.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

24