Hitachi L37X01AU FUNCTION continued Size Switching continued, Multi Picture Mode, picture mode

FUNCTION (continued)

Size Switching (continued)

RGB signal input

You can select a suitable size depending on the resolution.

Full 4:3

Display Area Selection Diagram

Resolution		Full	4:3
640x400 (VGA)
640x480	(VGA)
800x600 (SVGA)
1024x768	(XGA)
1280x768	(WXGA)
1280x1024(SXGA)
1360x768	(WXGA)

Multi Picture Mode

With this feature, you can watch different channels simultaneously on one screen in several ways. As for the available signals, please refer to "Recommended Signal List" on 57 , 58 .

Activate the Multi Picture Mode in HDMI Mode

To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press on the remote control.

2-picture mode

You can watch two different pictures side by side.

This mode is available in both TV mode and AV mode ( AV1~4 Input).

Control on the side with Speaker Icon

Audio is output from the selected picture with the speaker icon.

Switch the Input modes (HDMI1~3) on the Main-Screen.

Switch the Input modes (DTT/TV and AV1~4) or change

Channels on the Sub-Screen.

1.To shift the speaker icon , press button.

ƔThe speaker icon will be shifted from A to B back-and-forth.

2.To change the channel of the of the Sub -Screen

ƔMake sure that mark is located on the Sub -Screen.

ƔPress to select channels.

3.To change the Input mode of the Sub -Screen

ƔMake sure that the speaker icon is located next to the Input mode indication of the Sub -Screen

ƔPress Input Select buttons on the remote control. ( DTV/TV , AV1~4 are available)

NOTE

ƔThe message “ Not Available” will be appeared on the screen when the combinations of the Input modes are not acceptable.

(See the Table below for details.)

47

The selected picture with speaker icon

HDMI 1

A	B
Main-Screen	Sub-Screen