FUNCTION (continued)
Picture Freezing
By pressing 
button, you can change to freeze mode
easily anytime you like. Press it again to return to normal picture.
Freeze button
Power Save Mode
When the AV input is selected
You are provided the function to save power consumption when no signal is detected in AV input. Set to On in “Video Power Save” from Function Menu, which leads to the power save mode in AV1 /AV2 /AV3 /AV4 /HDMI1 /HDMI2 /HDMI3 and the Standby mode in other AV input. Please see the table below for details.
1. | Press | button. |
|
|
|
2. | Select “Setup” menu and press | button. |
| ||
3. | Select ”Video Power Save” and press | button. |
| ||
|
|
| Video Power Save | Off | |
|
|
| On | ||
|
|
|
|
| |
Setup
Video Power Save
Reset
Select OK Set
Off
Return
| When no signal is detected |
| When signal is input during | |
| Condition | Indicating Lamp | on in “Video Power Save” | |
|
| |||
|
|
|
|
|
AV1~AV2, |
|
|
|
|
AV3~AV4, | Power Save* | Orange |
| Turns On automatically |
HDMI1~3 |
|
|
|
|
Returning to operating status |
|
| *Power Save that only control Back Light On/Off. | |
|
|
|
| |
ƔPress the Input Select button of the control panel or the remote control to restart the television.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode: Off) can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync | Horizontal | Yes | No | Yes | No |
signal | Vertical | Yes | Yes | No | No |
|
|
|
|
|
|
PC signal | Active |
| Blank (no display) |
| |
(normal display) |
|
| |||
|
|
|
|
| |
Operation mode | On |
| Off |
| |
|
|
|
|
| |
Indicating lamp | Lights green |
| Lights orange |
| |
|
|
|
|
|
|
Returning to operating status
ƔOperate the personal computer, then input computer’s H. sync, V. sync or press the Sub Power button of the control panel or the remote control to restart the television.
50
