Blaupunkt Pasadena CD71 installation instructions Tone and volume, Tone and Volume

TONE AND VOLUME

Tone and volume

Note:

You can make separate adjustments to the bass, treble and loudness for each audio source.

Adjusting the bass

➮Press the AUD button, 9. “BASS” appears in the display.

➮Press the or buttons, 7, in order to adjust the bass.

When you have finished the adjustment

➮Press the AUD button, 9.

Adjusting the treble

➮Press the AUD button, 9. “BASS” appears in the display.

➮Press the or button, 7, as often as is necessary for “TREBLE” to appear in the display.

➮Press the or buttons, 7, in order to adjust the treble.

When you have finished the adjustment

➮Press the AUD button, 9.

Loudness

Loudness refers to a bass boost at low vol- ume levels matching the ear’s sensitivity.

➮Press the AUD button, 9. “BASS” appears in the display.

➮Press the or button, 7, as often as is necessary for “LOUD” to appear in the display.

➮Press the or buttons, 7, in order to adjust the loudness. “LOUD OFF” means that the loudness function is in- active, while “LOUD 6” indicates the maximum loudness boost.

When you have finished the adjustment

➮Press the AUD button, 9.

Adjusting the left/right volume balance

➮In order to adjust the balance, press the AUD button, 9.

“BASS” appears in the display.

➮Press the or button, 7, as often as is necessary for “BAL” to appear in the display.

➮Press the or buttons, 7, in order to adjust the balance between left and right.

When you have finished the adjustment

➮Press the AUD button, 9.

Adjusting the front/rear volume ratio (fader)

➮In order to adjust the fader, press the AUD button, 9.

“BASS” appears in the display.

➮Press the or button, 7, as often as is necessary for “FADER” to appear in the display.

➮Press the or buttons, 7, in order to adjust the balance between front and rear.

When you have finished the adjustment

➮Press the AUD button, 9.

TA-SOUND (only in EUROPE tuner mode)

You can make separate adjustments to the tone and volume for traffic announcements.

➮Hold down the softkey, 4, indicating “TA” for longer than two seconds.

“TA-SOUND” appears in the display.

➮Press the or button, 7, as often as is necessary for the desired parame-

ter to appear in the display.

➮Perform the adjustments using the

or key, 7.

When you have finished the adjustment

➮Press the AUD button, 9.

40