Blaupunkt Pasadena CD71 External audio sources, TMC for dynamic navigation systems

EXTERNAL AUDIO SOURCES TMC

External audio sources

Instead of the CD-changer, you can connect an external audio source with line output. Such sources might be a portable CD player, a MiniDisc player or an MP3 player.

The AUX input must be switched on in the menu.

You need an adapter cable to connect an ex- ternal audio source. You can obtain such a cable from your Blaupunkt dealer.

Switching the AUX input on and off

➮Press the MENU button, 8.

➮Press the button, 7, as often as is necessary for “AUX OFF” or “AUX ON” to appear in the display.

If “AUX ON” is displayed, the input has al- ready been switched on.

➮Press the or buttons, 7, in order to switch AUX on or off.

➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

Note:

If the AUX input is switched on it can be se- lected with the CDC button, =.

TMC for dynamic navigation systems

TMC means “Traffic Message Channel”.

TMC is used to transmit traffic announce- ments digitally, and can therefore be used for route planning by suitable navigation systems. Your car radio has a TMC output that can be connected to Blaupunkt navigation systems. Your Blaupunkt dealer can tell you which nav- igation systems can be used with your car radio.

If a navigation system is connected and a TMC station is received, TMC will light up in the display.

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

59