Radio operation with RDS (Radio Data System)
Selecting the frequency band
You can select from the following frequen- cy bands:
FM 87.5 – 108 MHz,
MW 531 – 1602 kHz and
LW 153 – 279 kHz as follows:
•Press TU: menu level 2 is displayed.
Station tuning
Station seek 
/
•Press 
/
: the radio automatically looks for the next station.
If 
/
is held down at the top or bottom, the seek run continues forwards or back- wards at higher speed.
If necessary, these functions can be deacti- vated on menu level 2.
Manual tuning:
•Press << >>: the frequency is in- creased/reduced in steps.
Hold the << >> rocker down to the right or left to change the frequency quickly.
Menu level 2
•Select the frequency band by pressing BND repeatedly until the desired fre- quency band appears.
The sequence is: FM I, FM II, FMT, MW, LW.
Station seek
Up
Down
<</ >> Up/down in steps
(on FM only when AF is deactivated)
Manual tuning with << >>
You can tune manually.
Condition:
AF and PTY are deactivated (the corre- sponding symbols are not lit in the display).
Paging through the transmis- sion chains (FM only)
You can use << >> to call up stations from the region in which they can be received.
If a number of programmes in the station chain can be received, you can page through them with >> (forwards) or << (backwards), e.g. NDR 1, 2, 3, 4... .
To start Travelstore, for example:
•Press TU: menu level 2 is displayed. If “AF” fails to come on:
•Press AF on menu level 2.
52
