![Programming with DSC](/images/new-backgrounds/22058/2205865x1.webp)
Programming with DSC
The car radio offers the facility to adjust cer- tain settings and functions to your require- ments and to store these changes with the aid of DSC (Direct Software Control).
The default settings are selected at the fac- tory.
An overview of the factory default settings is provided below for future reference.
To alter a programming setting:
•Press DSC.
Select and adjust the functions described below by means of the rocker and the ENT key. The status of adjustment is shown on the display.
/
Select function
<< / >> Adjust/call up value
ANGLE Adjust the display to your own viewing angle.
DIM DAY Select the display brightness for daylight (Stages
DIM NIGHT Select the display brightness for darkness (Stages
The brightness is switched over automatically by the headlights.
TA VOL Adjust the volume of traffic announcements and the warning signal from 0 - 66. Traffic announcements are played at this volume if the standard volume is lower. If the standard volume is greater than TA VOL, traffic announcements are played at the standard volume.
ON VOL Select the initial volume. Use << >> to select the de- sired initial volume.
If “LAST VOL” is selected, the initial volume is the same as that last selected.
PEAK ON/OFF
Activate/deactivate the dy- namic volume level display.
SCROLL | Appears only in MiniDisc |
| mode. |
| If the track name is to run |
| continuously through the |
| display, SCROLL ON must |
| be selected. |
REG | Appears only in radio mode. |
| If you wish to receive re- |
| gional programmes for your |
| broadcast area, REG ON |
| must be selected. |
SHARX Automatic bandwidth switch- ing on the FM band.
Where the station density is high, switch to SHARX ON with << >>: this largely elimi- nates interference from ad- jacent stations.
”SHARX ON” is the default setting.
68