![KeyCard anti-theft protection system](/images/new-backgrounds/22058/2205827x1.webp)
KeyCard anti-theft protection system
• Remove the first KeyCard and, with | Battery positive and constant battery posi- | Keep the car radio passport in a safe | |
“CHANGE” on the display, insert the | tive are connected as described in the in- | place, but not in the car. | |
new KeyCard. | stallation instructions. | Teaching in the new KeyCard | |
When “READY” or “LEARN KC” appears: The unit is switched off; the control panel is | |||
• Press DSC. | open; the KeyCard is removed; LED ON is | • Insert the new KeyCard and engage | |
selected in the DSC menu (default factory | |||
The unit is now also ready for operation with | |||
the control panel. | |||
setting). | |||
the new KeyCard. |
| ||
If necessary, refer to “Programming with • Press ON. | |||
A maximum of two KeyCards can be taught | |||
DSC – LED”. | • Press TU and ST1 within 5 seconds: | ||
in. | |||
Deactivating the flashing LED | “0000” appears on the display. | ||
If a third KeyCard is taught in, the card which | |||
Select “LED OFF” in the DSC menu to de- | • Using the rocker, enter the | ||
is not employed for the | |||
activate the flashing LED. | master code from the car radio pass- | ||
of the new card automatically loses its va- | |||
| port: | ||
lidity. | Care of the KeyCard | ||
/ - Enter the digits (press once for | |||
| |||
Displaying the radio passport | The KeyCard will function perfectly only if | one, twice for two, etc.) | |
<< >> - Select the insertion point | |||
data | the contacts are kept free of foreign parti- | • After entering the correct master code, | |
| cles. Avoid touching the contacts directly | ||
You can use the KeyCard supplied to call | press ENT. | ||
with your hands. | |||
up the radio passport data such as the unit | The new KeyCard is accepted when the unit | ||
If necessary, clean the KeyCard contacts | |||
name, type number (7 6 ...) and serial | switches to play. | ||
using a cotton bud soaked in alcohol. | |||
number on the display. |
| ||
|
| ||
Refer to “Programming with DSC – READ | KeyCard lost/damaged | Input errors | |
KC” for the procedure. | Should the input not be correct, “CODE | ||
Visual display for | Should you damage or lose the KeyCard for | ERR” appears on the display. After three | |
successive incorrect inputs, “WAIT 1h” ap- | |||
your unit, you can teach in a new KeyCard. | |||
tection | pears on the display. The unit remains in | ||
You can purchase the new KeyCard from | |||
| Wait mode for one hour. | ||
your dealer. You will also require the mas- | |||
• Switch the unit off and on again. | |||
of a flashing LED ? when the vehicle is | ter code for the unit, which can be found in | ||
parked and the KeyCard removed. | the car radio passport. | Repeat the |
The following conditions must be met:
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
49