Condensed instructions
3Adjusting the volume
Turn the knob to adjust the volume.
The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL).
ON VOL can be changed (refer to “Programming with DSC – ON VOL”).
4Softkeys/display
Softkey = key with variable function The functions shown in the display can be selected.
Radio mode
In radio mode, use TU to toggle be- tween menu level 1 and menu level 2. The system automatically returns to menu level 1 when no key has been pressed for eight seconds.
Menu level 1
Station keys and memory levels
NEXT - FM
Switch between the memory levels FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switch between the MW and LW fre- quency bands.
ST1 - ST6
ST1- ST6 can be used on this menu level to store radio stations on the FM levels I, II and “T”.
You can store six stations each on the MW and LW bands.
Store station – hold one of the station keys ST1- ST6 down until the pro- gramme can be heard again (beep). Call up station – select the frequency band. On FM, select the memory level using NEXT and press the appropriate station key briefly.
Menu level 2
Adjusting radio functions
NEXT - FM
Switch between the memory levels FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switch between the MW and LW fre- quency bands.
BND
Select the frequency band and memo- ry level (FM I, FM II, FM T, MW, LW).
SCA - Scan
a) PTY is deactivated
(logo is lit normally, not in reverse video)
Press SCA (Radio Scan) briefly – “SCAN” appears in the display alter- nately with the code of the sampled station. All stations on the frequency band which can be received are sam- pled briefly.
40
