Blaupunkt RMD 169 Radio operation with RDS Radio Data System, Storing the programme type, PTY key

After the beep, the programme type of the station currently being received is displayed.

You can assign a different available pro- gramme type to each memory location.

If no station broadcasting the selected pro- gramme type is found, “NO PTY” appears briefly on the display, and the beep sounds. The last station selected is played.

Radio operation with RDS (Radio Data System)

Prompting the station for the pro- gramme type

On menu level 2:

•Hold PTY down for approx. 2 seconds.

Storing the programme type

A programme type is stored on each of the keys ST1 - ST6 by the factory.

You can however store other available pro- gramme types.

		”PTY” must be displayed before you can
If “NONE” is displayed, the station has no Refer if necessary to the “Saving the pro- store a different programme type.
PTY code.	gramme type” section below.	• If necessary, activate “PTY” using the

PTY key.

Displaying the selected programme type

•Press << or >>.

The last programme type selected is dis- played briefly.

Selecting the programme type

a)Using the station keys

If PTY is activated, the programme types defined by the factory can be selected by means of the keys ST 1 - ST 6.

• Press one of the keys 1 - 6.

b)Using the seek run rocker << >>

If PTY is activated, you can select a programme type with << >>.

•Press << or >>: the last programme type selected is displayed for three seconds.

•During this time, select the desired programme type with >> (forwards) or << (back).

•Press << or >> as many times as necessary.

To listen to a station broadcasting this programme type:

•Select the programme type with << >> and

•hold the desired key (ST1- ST6) down until the beep sounds.

The selected programme type can be called up by means of this key when PTY is acti- vated (“PTY” appears on the display).

Sampling stations with PTY-SCAN

Condition: “PTY” must be displayed.

•Press SCA.

The stations with this programme type which can be received are sampled briefly.

The selected programme type appears on the display for two seconds.

To listen to a station broadcasting this programme type:

• Start the seek run with /.

• Start the seek run with /.

If no station broadcasting the selected pro- gramme type is found, “NO PTY” appears briefly on the display, and the beep sounds. The last station selected is played.

Deactivating PTY-SCAN:

•Press SCA or the seek rocker again.

Following a frequency seek run, PTY-SCAN is automatically deactivated.

56