11 EN
be damaged seriously!
1. Loosen all the bolts with a spanner
until they rotate freely (“C”)
2. Remove the shipping bolts by
turning them gently.
3. Bolt hole covers (supplied in the bag
with the owner’s guide) are fitted
into the holes on the rear panel with
a special lock mechanism. To fit
the cover, first insert it into the hole
and then rotate it counterclockwise
with a screwdriver until it is locked.
To unlock, apply the procedure in
reverse.
C Keep the shipping bolts in a safe
place to reuse when the clothes
washer needs to be moved again in
the future.
C Never move the appliance without
shipping bolts properly fixed in place!
Levelling the washer
A WARNING - Do not use any tools to
loosen the lock nuts. Otherwise, they
can be damaged.
1. Manually (by hand) loosen the lock
nuts on the feet.
2. Adjust them until the washer stands
level and firmly.
3. Important: Tighten all lock nuts up
again.
Electrical Connection
Grounding Instructions
This appliance must be grounded. In
the event of malfunction or breakdown,
grounding will reduce the risk of
electric shock by providing a path of
least resistance for electric current.
This appliance is equipped with a
cord having an equipment-grounding
conductor and a grounding plug.
The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances
and the latest edition of the National
ElectricalCode,ANSI/NFPA70.
B WARNING – Improper connection of
the equipment-grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
serviceman if you are in doubt as to
whether the appliance is properly
grounded.
Do not modify the plug provided with
the appliance – if it will not fit the
outlet, have a proper outlet installed
by a qualified electrician.
B WARNING – Be sure that the power
cord is always accessible by the user
after the appliance is installed.
B WARNING – Never use an extension
cord or adapter to connect the
appliance to the electrical power due
to the risk of electric shock and/or
fire.
It is the personal responsibility and
obligation of the appliance owner to
provide a proper and grounded outlet
installed by a qualified electrician.
B WARNING – Never use a damaged
power cord since there is a risk of
electric shock and/or fire.
The damaged power cord must be
replaced by a qualified electrician as
soon as possible.
Electrical supply voltage must conform
to the voltage specifications
(208-240V, 60Hz) located on the
appliance. For this purpose, a
junction box (as seen in picture
below) must be obtained. Junction
box is supplied with Blomberg
Clothes Dryer (model no: DV
16540 NBL00) and it works as a
voltage converter from 110/120V to
208/240V between the mains and
appliance.
B WARNING – Only one appliance must
be connected to a properly grounded
individual branch circuit outlet.