Blomberg WM 67121 NBL00 installation instructions Automatic spin correction

		The automatic spin correction
		system might have been activated
		due to the unbalanced distribution of
		the laundry in the drum.
It continuously spins.	There may be an imbalance of	The laundry in the drum may be
Remaining time does not		tangled up too much. Laundry
	load in the drum.
count down.		should be rearranged and re-spun.
		No spinning is performed when the
		laundry is not evenly distributed in
		the drum to prevent any damage to
		the appliance and to its environment.
		Use the recommended amount of
	Using excessive amount of	HE detergent appropriate for water
	detergent.	hardness, soil level and amount of
		laundry.
	Not using HE detergent	Use HE detergent.
Excess foaming occurs.
	Detergent may have been stored	Store detergent in a cool and dry
	improperly.	place.
	Type of material being washed
	(lace items will cause excessive	Reduce the amount of detergent for
	foam due to their meshed	lace items.
	structure).
		Push “Start/Pause/Cancel”
		button. Mix 2 cups of water
Washer is completely full		with 1-2 tablespoon of fabric
of suds/Suds coming	Not using HE detergent / Using	softener and pour it into
out of dispenser during	excessive amount of detergent	detergent dispenser. Push “Start/
operation.		Pause/Cancel” button again.
		Use proper amount of HE detergent
		next time you operate the washer.
		Do not unload the washer.
		Operate a quick wash cycle (e.g.
		Delicates, Wools) without any
Load is still too soapy /	Not using HE detergent / Using	detergent. Add 1-2 tablespoon
Washer is full of suds at		of fabric softener into main
	excessive amount of detergent
the end of program.		wash compartment of detergent
		dispenser during water intake.
		Use proper amount of HE detergent
		next time you operate the washer.
	Unbalance detection due to 1-2	Add more laundry (e.g. a few
Load is still too wet at	small items in the drum (uneven	additional towels) to the drum and
	load distribution)	start a “Spin” or “Spin&Drain” cycle.
the end of program.
	Poor spinning results due to
	not using HE detergent / using	Use proper amount of HE detergent.
	excessive amount of detergent

32

EN