Contact
Do not return to place of purchase.
Maintenance
To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
While cleaning your unit, be sure to keep the area around the burner and pilot assembly dry at all times. Do not submerge the control valve assembly. If the gas control is submerged in water, do NOT use it. It must be replaced.
Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
WARNING:
FOR YOUR SAFETY:
•Do NOT touch or move heater for at least 45 minutes after use.
•Dome is hot to the touch.
•Allow dome to cool before touching.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use. Clean burner holes by using a
Carbon deposits may create a fire hazard. Clean dome and emitter with warm soapy water if any carbon deposits develop.
Note: In a
TIP:
Use
Owner’s manual and assembly instructions: model 163010 natural gas outdoor patio heater | 12/4/02 | 16 |