Blue Rhino 163010 General Components & Features, Additional Requirements, Attach Legs to Base

Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Assembly Instructions

General Components & Features

Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 19 for specifications.

Note: All the hardware is in a plastic bag packed in the emitter top inside of a cardboard divider inside the cap. This also includes the cup and cap support.

Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools.

(1) 7/16” Wrench

(1) 7/16” Socket Wrench

(1) #2 Phillips Head Screwdriver

(1) Leak Detection Solution (Instructions to prepare are included in step 13)

Note: You must follow all steps to properly assemble heater.

Step 1 – Attach Legs to Base

Note: Attach Leg with notches for hinges as shown at left.

•Secure each leg to base using (2) Large Bolts, (2) Lock Washers and (2) Large Nuts per leg. Finger tighten only.

• Do not fully tighten until Step 2.

Owner’s manual and assembly instructions: model 163010 natural gas outdoor patio heater 12/4/02 6