Contact
Do not return to place of purchase.
Before you attempt to use a propane cylinder, understand all cylinder and propane related precautions in Section #1 - “Safety First.”
The pressure regulator and hose assembly supplied with the appliance must be used and replacements must be those specified by the manufacturer.
•Slide full Propane Cylinder onto Heater Base.
•Attach Gas Line to Cylinder by turning black plastic knob clockwise over Cylinder valve until tight.
Note: Be careful not to kink flexible hose of Gas Line.
•Secure cylinder in place by attaching loose end of Cylinder Restraint Chain to hole in right leg.
Caution:
Your Endless Summer Portable Heater has been checked at all factory connections for leaks. Recheck all connections, as movement in shipping can loosen connections. Check for leaks even if your unit was assembled for you at the store.
•Make
•Turn cylinder valve ON.
•Check Gas Line / Control Valve for leaks:
•Spoon several drops of solution onto Gas Line and Control Valve connection.
•Inspect the solution at the connection to look for bubbles.
•If NO bubbles appear, then the connection is secure.
•If bubbles appear, there is a leak -
•Turn Cylinder valve OFF.
•Loosen screw on Clip.
•Release Gas Line fitting from control valve and
•Retighten Clip.
•If you continue to see bubbles after several attempts, contact
•Turn cylinder valve ON.
•Spoon several drops of solution onto Gas Line and Cylinder valve connection.
•Inspect the solution at the connection to look for bubbles.
•If NO bubbles appear, then the connection is secure.
•If bubbles appear, there is a leak:
•Turn Cylinder valve OFF.
•Release Gas Line fitting from Cylinder valve and
•If you continue to see bubbles after several attempts, contact
•Turn Cylinder Valve OFF.
11 | Owner’s manual and assembly instructions: model 223600 outdoor patio heater | 1/15/03 |